Comparing the EdgeFile X3, GenEndo, HeroGold, and ProTaper Gold Rotary Instruments Regarding the Effect of Different Concentrations and Temperature of NaOCl on Cyclic Fatigue Resistance.

AIM: This research was carried out with the objective of comparison between GenEndo, Protaper Gold, Hero Gold and EdgeFile X3 regarding the effect of different concentrations of NaOCl. MATERIALS AND METHODS: About 720 study specimens were included in the study. They were divided into four groups. Each group consisted of 180 files. Group A: GenEndo, Group B: Protaper Gold, Group C: Hero Gold, Group D: EdgeFile X3. Each group of instruments were further subdivided into nine subgroups (n = 20 for each subgroup). Testing of the cyclic fatigue was carried out in artificial canals which were prepared inside the blocks of stainless steel. The stainless steel blocks with artificial canals were established in a receiver that was packed with experimental solutions like distilled water, 5.25% NaOCl and 2.5% NaOCl. The adjustment of temperature was done at 25, 37, and 60°C. The rotation of the instrument was carried out inside the artificial canal as per the instructions of the manufacturer. The instrument was rotated until it got fractured. The time taken by the instrument to fracture was recorded in seconds. The number of cycles to fracture (NCF) was analyzed with the help of the equation (NCF = time to fracture × rpm/60). Surfaces at the site of fracture were examined with the help of a scanning electron microscope (EVOLS10, ZEISS) at magnification (300x and 2000x). RESULTS: It was noticed that there was a statistically significant increase in cyclic fatigue when sodium chloride was used as an endodontic irrigant instead of distilled water. The increase in cyclic fatigue was also observed when 5.25% sodium chloride was used instead of 2.5% sodium hypochlorite. Cyclic fatigue increased on change in temperature from 25 to 37°C and from 37 to 60°C. The difference was statistically significant (p < 0.05). It was observed that resistance against cyclic fatigue on treatment with different irrigation solutions at different temperatures was in the order of GenEndo > Protaper Gold > Hero Gold > EdgeFile X3. CONCLUSION: The resistance against cyclic fatigue in new NiTi rotary files can be affected significantly by different concentrations of sodium hypochlorite irrigant solution and the GenEndo rotary endodontic instrument has the maximum resistance against cyclic fatigue. CLINICAL SIGNIFICANCE: Irrigation of the root canal with irrigants, such as sodium hypochlorite (NaOCl) has been recommended strongly. NaOCl is used in the range of 0.5 and 6.5% concentration owing to its antimicrobial activity and tissue dissolution activities, particularly at higher temperatures. It has been postulated that fatigue of rotary endodontic instruments can be influenced by adjoining medium and their concentration.

A Comparative Evaluation of Efficacy of Various Obturating Techniques for the Presence of Voids.

Aim: Evaluation of the efficacy of different obturating techniques and assessment of the presence of voids in different regions of the canal. Materials and Methods: Sixty permanent single-rooted teeth with complete, mature root apices without any anatomic variation having straight patent root canals were included in the present study. Access cavity preparation followed by biomechanical preparation was done. Samples were divided into three groups-Group A: Single cone obturation, Group B: GuttaFlow 2, and Group C: GuttaCore, and obturation was carried out. The samples after obturation were stored at 370°C and 100% humidity in an incubator for 7 days to give adequate time for obturating materials to set. Cone beam computed tomography was performed with i-cat Cb 500 machine. The voids were checked on the root canal wall. The statistical analysis was done and the data after the statistical analysis was presented. Result: GuttaCore obturators presented a lesser volume of voids followed by GuttaFlow 2 than the single cone techniques. Conclusion: All the obturation techniques presented an inadequacy of obturation when the pre- and post-obturated volume of the root canal space was calculated. However, no statistically significant obturated volume differences were found between single cone and GuttaFlow 2 or between GuttaFlow 2 and GuttaCore system.

Comparison between Platelet-rich Fibrin and Saline Filling after Sinus Elevation without Adjunctive Bone Graft in Dental Implants Insertion Using CBCT.

AIM: The goal of this research was to compare radiographically the outcomes of hydraulic transcrestal sinus lifting with platelet-rich fibrin (PRF) or normal saline filling on implant survival rates, negative outcomes, and variations in the height of residual alveolar ridge (HARB). MATERIALS AND METHODS: There were 80 study participants included and 90 dental implants were placed. The study participants were divided into two categories: Category A and Category B. Each category consists of 40 study participants. Category A: Normal saline was placed in the maxillary sinus. Category B: PRF was placed in the maxillary sinus. Implant survival, complications, and HARB alterations were the outcome metrics. Radiographic images through Cone-beam computed tomography (CBCT) were retrieved and compared prior to surgery (T0), immediately following surgery (T1), three months later (T2), 6 months later (T3), and 12 months later (T4). RESULTS: There are 90 implants having an average length of 10.5 ± 0.7 mm were inserted into the posterior portion of the maxilla of 80 patients with an average HARB of 6.9 ± 1.2 mm. At T1, elevation in HARB peaked, and the sinus membrane continued to droop but steadied while observed at T3. The steady increment of areas of radiopacities was noticed below the elevated membrane of the maxillary antrum. A radiographic intrasinus bone increase of 2.9 ± 1.4 mm was caused by the PRF filling, compared to 1.8 ± 1.1 mm by the saline filling at T4 (p < 0.05). Over the course of the one-year follow-up period, all of the implants were operating normally with no major issues. CONCLUSION: Platelet-rich fibrin when used as a filling medium alone without bone graft can cause significant ascend in height of the residual alveolar bone (HRAB). CLINICAL SIGNIFICANCE: The degradation of the alveolar bone under the maxillary sinus following tooth loss frequently restricts the placement of the implant in the edentulous region of posterior maxilla. Numerous sinus-lifting surgery procedures and tools have been developed to address these problems. It has been a topic of debate regarding the benefits of bone grafts placed at the apical region of the implant. The sharp protrusions of the granules of bone graft may also provide a danger of membrane puncture. Recently, it was shown that regular bone gain might occur inside the maxillary antrum without the use of any bone transplant material. Additionally, if there were substances that filled the gap between the floor of the sinus and the raised sinus membrane, then the membrane of the maxillary sinus could be raised greater and for a longer period of time during the phase of formation of new bone formation.